Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Arlington Heights, CA
Chimney repair in Arlington Heights means working on century-old masonry, not modern factory-built fireplaces. Most homes in this Mid-City Los Angeles neighborhood went up between 1910 and 1930, and their original brick chimneys have been standing through dry summers, rare winter rains, and the occasional seismic event ever since. We inspect, repair, and restore those stacks using professional-grade materials, and we serve the entire 90019 ZIP. Call (877) 752-4855 for a repair assessment or sweep quote.
Why Arlington Heights Homes Are Different
Arlington Heights is a historic pocket of Mid-City Los Angeles, and its housing stock defines the chimney work we do here. The neighborhood is filled with dense blocks of 1910s and 1920s Craftsman bungalows, Spanish Colonial Revival homes, and California bungalows, many of which have been converted into multi-unit rentals over the decades. What that means for chimneys is simple: the original brick stacks and clay flue tiles have been in place for 80 to 100 years, and most have never been relined.
The mild Southern California climate sounds like good news for a fireplace, but it actually creates a specific pattern of failure. Chimneys here get light, seasonal use, so problems develop slowly and invisibly. A mortar crown can crack in a dry summer and nobody notices for years, until a winter rain drives water into the brick and turns a hairline crack into a spalling problem. The same dry heat bakes the mortar joints until they soften and crumble. And because so many Arlington Heights properties are rentals, tenants often light a fire a few times a season and never think to have the flue looked at. By the time we arrive, we routinely find original 1920s clay tiles with no cap, bird nests packed into the smoke chamber, and crowns that have quietly deteriorated over decades.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Arlington Heights Services
Two services keep Arlington Heights chimneys and exhaust systems safe: a full chimney sweep that clears the flue and smoke chamber of debris and obstructions, and dryer vent cleaning that removes lint buildup from one of the most overlooked fire hazards in an older home. Both begin with an inspection and both are performed by the same crew so a homeowner can book a single visit for the whole house.
Chimney Sweep in Arlington Heights
Older Arlington Heights chimneys collect more than soot. We find bird nests, leaves, and loose mortar fragments inside the flue, and in the 90019 ZIP we regularly clear masonry debris that has slumped down from cracked crowns. A sweep here also includes checking that the smoke chamber is clear and that the clay liner is not shedding spalled fragments into the firebox. For residents who want the full detail, see our Chimney Sweep in Arlington Heights page.
Dryer Vent Cleaning in Arlington Heights
Dryer vent cleaning in Arlington Heights matters because these homes are dense and the laundry rooms are often interior closets with long vent runs that trap lint quickly. Lint is the leading residential appliance fire cause, and in older multi-unit buildings a clogged shared vent can affect several units at once. We clean the full run and remove blockages at the exterior termination point. Details are on our Dryer Vent Cleaning in Arlington Heights page.
Chimney Repair in Arlington Heights
Chimney repair in Arlington Heights is rarely about a modern fireplace insert. The homes here were built for coal or wood burning, and their original chimneys were never designed for today’s use patterns. We work on stacks that have been standing since the Wilson administration, and the most common failures we fix are open or missing caps, cracked mortar crowns, failing flashing, and clay flue tiles that have spalled apart. You can find our broader repair scope on the Chimney Repair hub page.
Chimney Cap Installation
Signs you need it
You can see daylight through the top of the flue, or you have heard birds and debris falling into the firebox.
What it costs in Arlington Heights
A chimney cap installation in Arlington Heights typically runs $280 to $620 depending on the flue size and roof access.
How we do it
We measure the flue tile, select a stainless or copper cap that fits the existing crown, secure it with mechanical fasteners, and confirm the mesh is seated against the flue edge.
Chimney Cap Replacement
Signs you need it
The existing cap is rusted through, the mesh is torn, or the cap has lifted off the flue after a storm.
What it costs in Arlington Heights
A chimney cap replacement in Arlington Heights is usually $310 to $710 including removal of the old unit.
How we do it
We remove the old cap, wire-brush the flue rim, and mount a new correctly sized cap with stainless hardware so it stays put through Santa Ana winds.
Chimney Liner Installation
Signs you need it
The clay tiles are cracked, spalled, or missing in sections, often visible as chips in the firebox after a sweep.
What it costs in Arlington Heights
A chimney liner installation in Arlington Heights typically costs $2,900 to $5,800 depending on the flue height and diameter.
How we do it
We inspect the flue by camera, remove or prepare the existing clay surface, and install a properly sized flexible liner system such as DuraFlex from top to bottom.
Chimney Flashing Repair
Signs you need it
Water stains appear on the ceiling or wall near the chimney after rain, or the flashing metal is visibly lifting.
What it costs in Arlington Heights
Chimney flashing repair in Arlington Heights ranges from $420 to $980 depending on how much of the flashing must be replaced.
How we do it
We cut back the old flashing, reglet the new metal into the mortar joint, and seal it with a high-temperature sealant matched to the existing roof surface.
Chimney Crown Repair
Signs you need it
The concrete crown is cracked, missing pieces, or has pulled away from the flue tile, letting water run down the outside of the brick.
What it costs in Arlington Heights
A chimney crown repair in Arlington Heights is typically $450 to $1,100 depending on the size of the crown and the amount of brick lip that must be rebuilt.
How we do it
We remove loose crown material, form a proper overhang with a bond break, pour a new reinforced crown, and slope it away from the flue to shed water.
What Chimney Repair Costs in Arlington Heights
| Item | Typical range in Arlington Heights |
|---|---|
| Chimney cap installation | $280 – $620 |
| Chimney cap replacement | $310 – $710 |
| Chimney liner installation | $2,900 – $5,800 |
| Chimney flashing repair | $420 – $980 |
| Chimney crown repair | $450 – $1,100 |
Do I need a chimney liner if my clay tiles are cracked?
Usually yes. Cracked or missing clay tiles allow heat and combustion gases to reach the surrounding brick and combustible framing. A flexible liner install restores a continuous, insulated exhaust path.
Can you repair a chimney crown without rebuilding the whole stack?
Most of the time, yes. We remove the failed crown material and pour a new one over the existing brick. Full stack rebuilds are only needed when the brick itself has come apart.
Brands We Service in Arlington Heights
We install and service HeatShield ceramic liner resurfacing, DuraFlex flexible liner systems, plus Olympia Chimney and Famco caps and dampers. Parts are stocked for common Arlington Heights flue sizes, which keeps most repair jobs on a one-visit schedule. See our brands for the full parts list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Arlington Heights, CA
| Service | Typical range in Arlington Heights |
|---|---|
| Chimney sweep (full, with inspection) | $189 – $349 |
| Dryer vent cleaning | $139 – $259 |
| Chimney cap installation | $280 – $620 |
| Chimney cap replacement | $310 – $710 |
| Chimney liner installation | $2,900 – $5,800 |
| Chimney flashing repair | $420 – $980 |
| Chimney crown repair | $450 – $1,100 |
Prices in Arlington Heights push toward the upper end of these ranges when a chimney is on a steep roof, has a multi-story chase, or when years of deferred maintenance mean a small repair uncovers a larger one. We quote a flat price before any work begins, so there is no surprise on the invoice.
Neighborhoods We Serve in Arlington Heights
We work throughout the 90019 ZIP, including the residential blocks south of Olympic, the streets around Crenshaw and Washington, and the older single-family pockets west of West Adams. Response time for the area is typically two to four business days depending on call volume and roof access.
- The blocks south of Olympic Boulevard
- Streets near Crenshaw and Washington Boulevards
- Residential streets west of West Adams Boulevard
- Multi-unit converted bungalows near Pico and La Brea
- The central Arlington Heights residential grid
Service Area – Cities Near Arlington Heights
We also cover nearby Mid-City Los Angeles neighborhoods. That includes Mid-City, CA, Jefferson Park, CA, Baldwin Hills, CA, and Leimert Park, CA. Call for scheduling if you are just outside the 90019 boundary.
Serving Arlington Heights, CA – Our Local Coverage Area
We’re based in the Arlington Heights area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Arlington Heights
Most Arlington Heights repair calls are scheduled within two to four business days. Sweeps and dryer vent cleanings can usually be booked the same week. Call (877) 752-4855 and we can confirm the next open slot for the 90019 area.
Most standard repairs such as cap replacement, crown repair, and flashing work do not require a city permit. If your chimney needs work that touches the firebox structure or alters the flue system, we will tell you whether a permit is required before any work begins.
Yes. We work with property owners and managers across Arlington Heights on tenant-occupied bungalows and multi-unit buildings. Camera inspection reports with photos are available so owners can see exactly what was found and what was done, which is useful when a tenant reports a smoking fireplace or water leak.
For a quote on chimney repair, a sweep, or dryer vent cleaning in Arlington Heights, call (877) 752-4855. We will talk through what you are seeing at the chimney, tell you what it likely costs, and schedule a visit if you want one. Chimney Sweep Baldwin Hills has served Arlington Heights since 2015.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Arlington Heights Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Cole Meyer"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Ryan Vaughn"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Sami Najjar