Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Venice, CA
Chimney repair in Venice usually means one of three things: a cracked crown letting salt-laden marine air into the masonry, a missing or rusted cap letting rain straight down the flue, or a liner that’s spalled to the point where the fireplace can’t draft safely. Most of the homes we work on were built between 1905 and 1940, and their original brick chimneys were designed for occasional fires, not decades of ocean air exposure. Call (877) 752-4855 and we’ll tell you what’s actually wrong, with camera evidence, before anyone quotes you a repair.
Why Venice Homes Are Different
Venice’s chimney work is dominated by the 1905 to 1930s beach bungalows and 1920s to 40s Spanish Revival and Craftsman homes on and around the walk streets like Nowita, Marco, and Amoroso, and throughout the Venice Canals. These original brick chimneys were built for decorative fireplaces rather than heating, so most calls we get are about drafting, cracked crowns, and seismic-era masonry on small, tightly-spaced lots, not heavy wood-burning volume. The ocean marine layer one to three miles inland makes salt-laden damp air the defining enemy of Venice masonry, which is a distinctly coastal-Venice problem rather than a general LA one.
Crown deterioration and spalling brick show up fast here because the masonry is rarely dry. Cool, damp morning air keeps the outer surface moist, salt wicks into the mortar joints, and the freeze-thaw cycle isn’t even the biggest issue. The salt itself crystallizes and pops the brick face. On and around the walk streets and canals, lots are so tight and access so restricted – no rear alley, narrow walkways, footbridges – that our techs routinely carry ladders, rods, and vacuums in by hand. It changes how we quote the job and how long it takes. We plan for it from the start.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Venice Services
Most Venice homeowners call us for one of two things: a chimney that hasn’t been swept since the previous owner left, or a dryer vent that’s never been cleaned since the laundry room was renovated. Both are fire-safety items, and both are cheaper to handle than the insurance claim.
Chimney Sweep in Venice
Creosote loads in Venice fireplaces are usually light because the climate is mild and fireplaces see occasional evening and holiday use rather than heavy winter burning. The bigger issue is soot mixed with damp salt air, which forms an acidic paste that eats at mortar joints and leaves surfaces harder to clean. We run brushes sized to the flue, vacuum with a HEPA filter so nothing drifts into the living room, and check the damper and smoke shelf while we’re in there. Full details, including pricing, are on our Chimney Sweep in Venice page.
Dryer Vent Cleaning in Venice
Clothes dryers in Venice bungalows usually vent through short, uninsulated runs that pass through unconditioned spaces, and the humid coastal air makes lint stick to the duct walls faster than in drier inland neighborhoods. If the dryer takes two cycles to finish a load or the laundry room stays hot after a cycle, the vent is probably restricted. Lint buildup is the leading residential appliance fire cause, so this isn’t cosmetic. See our Dryer Vent Cleaning in Venice page for the full breakdown.
Chimney Repair in Venice
Chimney repair in Venice is usually about moisture control and structural stability, not firebox performance. Homes built between 1910 and 1940 still have their original brick chimneys, often unlined, and the salt air has worked on the mortar and crown for decades. We use HeatShield ceramic resurfacing and DuraFlex liner systems when the flue itself has failed, which saves a teardown and gives the chimney another two to three decades of service. Most importantly, we don’t recommend a repair without camera evidence you can look at yourself, because we know that’s what Venice homeowners are most wary of. Our full repair scope is on the Chimney Repair page, but the specifics below are what we run into in Venice most often.
Chimney Crown Repair
Signs you need it
Efflorescence, white mineral staining, or crumbling mortar at the top face of the chimney crown, plus spalled brick just below it, means water is getting in and has been for some time.
What it costs in Venice
Chimney crown repair in Venice typically runs $250 to $600 for a standard precast crown repair, and $950 to $2,200 when the crown is built from scratch or rebuilt with a custom form.
How we do it
We remove the loose material, build a new crown with a proper drip edge that keeps water off the brick face, seal it with a waterproof membrane, and photograph the work before and after.
Chimney Liner Installation
Signs you need it
Flaking tile chips in the firebox, a soot smell in rooms you don’t use, or a camera inspection showing cracks or gaps in the clay flue tiles means the liner has stopped doing its job.
What it costs in Venice
Stainless steel liner installation in Venice starts around $1,800 for a straight short run and runs up to $4,500 for larger multifamily or multi-story chimneys, while HeatShield resurfacing usually lands between $2,500 and $5,000.
How we do it
We confirm the flue dimensions by camera, then either pull a DuraFlex stainless liner down the existing flue or pump HeatShield ceramic over a prepared surface, and then verify the result with a second camera pass.
What Chimney Repair Costs in Venice
| Item | Typical range in Venice |
|---|---|
| Chimney crown repair (precast / standard) | $250 – $600 |
| Chimney crown rebuild / custom form | $950 – $2,200 |
| Stainless steel chimney liner | $1,800 – $4,500 |
Salt air corrosion and tight access are the two factors that push Venice quotes toward the high end of any range. You’ll get a fixed number before we start, and we’ll show you the camera footage that justifies the work.
Do I actually need a new liner, or can it wait?
If the camera shows hairline cracks but no flue tile gaps and the fireplace drafts fine, the liner can often wait. If there are missing tile sections or the mortar joints between tiles are gone, that’s a carbon monoxide leak risk in the wall cavity and shouldn’t wait. Call (877) 752-4855 and we’ll give you an honest read with the images to prove it.
What happens if I skip a cracked crown in Venice?
Water keeps entering the masonry, salt crystals expand and contract, and the brick face spalls further until the chimney crown cracks apart and the flue liner begins to shift. The repair cost roughly doubles by that point, and the risk of chimney fire in the wall cavity goes up.
Brands We Service in Venice
We stock and install Copperfield, DuraFlex, and HeatShield products, and we service chimneys built with Gelco components as well. Parts are kept on the truck for the common Venice jobs, which means most repairs don’t need a second visit. See our brands for the full line.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Venice, CA
| Service | Typical range in Venice |
|---|---|
| Chimney sweep (standard, one fireplace) | $180 – $325 |
| Chimney sweep with smoke chamber cleaning | $350 – $600 |
| Chimney cap installation | $150 – $500 |
| Chimney cap replacement | $150 – $500 |
| Chimney crown repair (precast / standard) | $250 – $600 |
| Chimney crown rebuild / custom form | $950 – $2,200 |
| Chimney flashing repair | $180 – $500 |
| Stainless steel chimney liner | $1,800 – $4,500 |
| Dryer vent cleaning | $99 – $250 |
In Venice, the two biggest price drivers are access and mortar condition. A walk-street or canal home where every tool has to be carried in by hand will run higher on labor, and a crown that’s been soaking in salt air since the 1930s will need more material prep than the same job in Culver City. You’ll get a fixed quote before any work starts, and we won’t add a line item unless you’ve approved it.
Neighborhoods We Serve in Venice
We cover all of Venice, including the 90291 and 90294 ZIP codes, and we schedule by day-of-week route rather than by distance, so we’re never more than a short drive away when your appointment comes up.
- Venice Canals
- Walk streets (Nowita, Marco, Amoroso)
- Oakwood
- Silver Triangle
- Venice Beach boardwalk area
Service Area – Cities Near Venice
While this page is for Venice, our crews regularly work the neighboring communities with the same equipment and the same upfront-pricing rule. For a chimney or dryer vent that’s closer to Culver City, CA, Beverlywood, CA, Mid-City, CA, or Baldwin Hills, CA, give us a call and we’ll route the truck accordingly.
Serving Venice, CA – Our Local Coverage Area
We’re based in the Venice area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Venice
We schedule Venice calls on a weekly route, so most appointments land within five to seven business days. If you have water actively entering the chimney or a visible crack after a storm, we’ll move you up and may be able to get a tech out faster. Call (877) 752-4855 for the current open slots.
For most chimney repairs and sweeps, no. If you live in a designated historic district or your home falls under specific Venice coastal development rules, exterior work like a full crown rebuild may need a quick check with city planning. Interior liner work doesn’t. We’ll flag it if your project looks like it needs approval.
Yes, and we plan for it before we arrive. Our techs carry ladders, rods, and vacuums in by hand when there’s no rear access, so the job just takes a little longer on setup and breakdown. You don’t need to arrange anything, and the price you’re quoted accounts for the access from the start.
If you’re in Venice and the chimney hasn’t been looked at in years, or the dryer takes forever to finish a load, call (877) 752-4855 for a free estimate. We’ll tell you what’s wrong, show you the proof, and fix it with materials that hold up to salt air.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Venice Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Beatriz Flores"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Shane Reed"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Marco Morales